Southern California sits at the convergence of multiple active fault systems — the San Andreas, the Newport-Inglewood, the Puente Hills, the Whittier, the Elsinore, and dozens of smaller faults that traverse the region’s urban core. For development projects in this geologic environment, seismic hazard is not a theoretical consideration. It is an engineering reality that must be quantified, disclosed, and mitigated.
Surface fault rupture is the displacement of the ground surface along an active fault during an earthquake. The Alquist-Priolo Act was enacted specifically in response to the surface rupture that caused significant building damage in the 1971 Sylmar earthquake. Numerous Southern California fault zones — including the Newport-Inglewood fault traversing the coastal plain and the Whittier fault in the San Gabriel Valley — require investigation before development.
Ground shaking is the vibration of the earth during an earthquake, transmitted from the fault rupture to the surface. The amplitude and frequency content depend on earthquake magnitude, distance from the fault, and local soil conditions. California’s CBC requires seismic design based on site-specific ground motion parameters determined by geotechnical investigation.
Liquefaction occurs when saturated, loosely packed sandy soils temporarily lose strength during earthquake shaking, behaving like a liquid. Southern California’s coastal plain areas — significant portions of Long Beach, Huntington Beach, Carson, and the San Fernando Valley — are mapped as liquefaction hazard zones by the CGS. Projects in these zones require a site-specific liquefaction evaluation analyzing subsurface soil stratigraphy, groundwater depth, and seismic loading.
Slope failures triggered by earthquake shaking are a significant hazard in Southern California’s hillside terrain. The CGS Seismic Hazard Mapping Act maps earthquake-induced landslide hazard zones requiring site-specific investigation that evaluates slope geometry, soil strength, and anticipated earthquake loading.
G3 SoilWorks conducts seismic hazard assessments addressing all applicable California regulatory requirements. Our assessments include: fault investigation for Alquist-Priolo compliance where applicable; site characterization for CBC seismic design parameters; liquefaction evaluation in mapped hazard zones; earthquake-induced landslide evaluation where applicable; and a written report with engineering recommendations for regulatory submission.
The CBC requires that structural engineers use site-specific ground motion parameters for seismic design. These parameters — mapped spectral acceleration values Ss and S1, and the site amplification factors Fa and Fv — depend on the site class, which is determined by the geotechnical engineer based on average shear wave velocity (Vs30) in the upper 30 meters of soil. A site with soft soil (Site Class E) can amplify ground shaking by a factor of 2 to 4 compared to a rock site (Site Class B or C), substantially increasing structural design loads and costs.
G3 SoilWorks performs shear wave velocity measurements using seismic refraction or downhole velocity measurements in conjunction with borings, providing the Vs30 data needed for CBC site classification and ground motion parameter determination.
The Newport-Inglewood fault traverses one of the most densely developed corridors in Southern California — from the Baldwin Hills through Inglewood, Hawthorne, Gardena, Torrance, and into the coastal communities of Long Beach and Seal Beach. The fault produced the 1933 Long Beach earthquake (M6.4), which killed 120 people and prompted California’s first major school construction safety legislation. The fault is classified as active under Alquist-Priolo criteria, is the subject of mapped fault zones in Los Angeles and Orange Counties, and cuts through areas that have been continuously urbanized for decades.
Development along the Newport-Inglewood fault corridor requires fault investigation reports by licensed CEGs for any new habitable structure in the mapped zones. The practical complexity in this corridor is that the fault has multiple strands of varying activity levels, and distinguishing active from inactive strands requires careful trench logging and often radiocarbon dating of offset features. G3 SoilWorks has conducted fault investigations along the Newport-Inglewood fault corridor in multiple jurisdictions, including the City of Inglewood, Los Angeles County, and the City of Long Beach.
When a project is located within an Alquist-Priolo Earthquake Fault Zone, a fault investigation report prepared by a licensed Certified Engineering Geologist (CEG) is required before any permit for a habitable structure is issued. The report must meet the standards established by CGS Special Publication 42, which defines the minimum scope of investigation based on the nature of the project and the fault zone. Key elements include: a review of all published literature and prior investigations regarding active faults at the site; at least one exploratory trench excavated across the suspected fault trace to expose the subsurface geology; logging of the trench walls by the CEG to identify any evidence of faulting; determination of whether identified faults are active (have displaced Holocene-age deposits, generally within the last 11,000 years); and a report presenting findings, conclusions, and a fault setback recommendation.
In complex geological settings — where multiple fault strands may be present, or where the fault trace is obscured by alluvial cover — additional trenching or borings may be required. The consequences of an inadequate fault investigation are significant: if active faulting is identified post-construction that was not identified in the investigation, the liability implications are severe. G3 SoilWorks’ CEG staff conduct fault investigations in conformance with CGS SP 42 requirements and have prepared reports accepted by building departments across more than two dozen Southern California jurisdictions.
When a project-level liquefaction evaluation confirms significant liquefaction potential, the geotechnical engineer must recommend mitigation measures appropriate to the hazard level and project type. Common mitigation approaches include: ground improvement to densify loose soils (dynamic compaction, vibro-compaction, or compaction grouting); deep foundation systems that extend through liquefiable soils to competent bearing strata; mat or post-tensioned foundations with sufficient rigidity to tolerate potential liquefaction-induced settlement; and structural design that accounts for the reduced or eliminated bearing capacity from liquefaction. The mitigation approach must address not only bearing capacity reduction during liquefaction but also lateral spreading — the lateral displacement of ground toward a free face that can damage foundation systems even when vertical settlement is manageable.
California’s seismic regulatory framework was built over decades of learning from earthquake damage. The Alquist-Priolo Act, the Seismic Hazard Mapping Act, and CBC seismic design requirements exist because the history of California earthquakes has proven, repeatedly, that specific geologic conditions produce predictable types of damage. A seismic hazard assessment isn’t bureaucratic friction — it’s the translation of that history into design requirements that protect people and property in the next earthquake.
⟶ Request a Seismic Hazard Assessment
https://g3soilworks.com/services/engineering-geology-and-seismology/
📋 GET A PROPOSAL FOR YOUR PROJECT
https://docs.google.com/forms/d/e/1FAIpQLSdNCkQQ2Ys8-j4eDgKHp_hbwhAajop_4U7SXwEpyFv473-D5A/viewform
Alquist-Priolo fault zone maps are publicly available through the California Geological Survey. You can search by address using the CGS online fault zone database. If your property is within a mapped zone, a fault investigation report by a licensed CEG is required before permits for habitable structures can be issued.
A seismic hazard report addresses one or more of the four primary seismic hazards. It is required when a project is located in a mapped Alquist-Priolo fault zone or a CGS Seismic Hazard Zone, and may be required by local jurisdictions for projects in areas with known seismic concerns.
Liquefaction can cause buildings to settle unevenly, tilt, or lose foundation support when saturated loose sandy soils temporarily behave like a liquid during earthquake shaking. Areas of Southern California’s coastal plain, river valleys, and filled areas are mapped as liquefaction hazard zones.
Ground motion analysis characterizes the amplitude and frequency of earthquake shaking expected at a specific site. California’s CBC requires structural engineers to design for site-specific ground motion parameters. Soft soils amplify ground shaking compared to rock sites — a factor that significantly affects structural design requirements and costs.
A fault investigation for Alquist-Priolo compliance typically ranges from $4,000 to $10,000. A liquefaction evaluation typically ranges from $3,000 to $8,000. Combined assessments and more complex sites are priced accordingly. G3 SoilWorks provides project-specific proposals.
Follow, engage, learn. Stop by our blog to see what’s happening at G3SoilWorks.
G3Soilworks – a full service geotechnical/ engineering geologic consulting firm serving clients since 2009 and delivering expert solutions with our highly experienced team and specialized consultants.
G3SoilWorks
350 Fischer Avenue Costa Mesa, CA 92626
Tel. 714.668.5600
E. info@g3soilworks.com